Replacing The Tube Tank Pro Heating Coil:
The life expectancy of the Tube Tank Pro heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.
- Unscrew your Tube Tank Pro form your mod.
- Point the Drip Tip of the Tube Tank Pro downward and unscrew the base plate from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank.
- After you've disassembled your Tube Tank Pro. Remove the old TUBE TANK PRO COIL from the base, by unscrewing it.
- Using one of the replacement TUBE TANK PRO REPLACEMENT COIL, screw in a new one into the base.
- Prime the coil and refill the tank following these instructions.
- Reassemble the Tube Tank Pro.
After filling, wipe any liquid off the Tube Tank Pro and the 510 threaded connection for best care and performance.
***Replacement coils for the TUBE TANK PRO come in a choice of Ω ratings: 0.5 OHM KANTHAL or 0.25 OHM NICKEL. ***