Follow

Filling/Re-Filling your Tankomizer

Filling your Tank:
 
There are two ways to fill the tanks, first I will cover the filling method with a bottle of juice with a dripper top, second the Needle Tip Bottle Cap method.
 
Bottle Method

1: remove the large end cap on the bottom of the Tank. (the end that will be inserted into the Tankomizer.
 
2: Fill the Tank reservoir with 1.1ml of juice, or just a little less then completely full.
 
3: Snap the end cap back on the Tank. Making sure it is completely back on.
 
Your Tank is now filled and ready for use.
 
If you are filling more than one and want to store them, at this point place the silicone end cap back on the Tank, making sure the notches in the cap line up with the flat sides of the Tank. They are now ready to me stored.
 
Needle Tip bottle Cap Method
 
1: Take your already punctured Tank. and hold it with the end cap facing up.
 
2: Take your bottle of eliquid and install the needle tip bottle cap.
 
3: Making sure the end cap it securely on the Tank, place the end of the needle tip cap into the hole in the end cap of the Tank ( not the hole in the mouth end of the tank..

4: Slowly inject the e-liquid into the Tank. Fill it to about 80% full. You will want to leave a little space int he top for an air pocket to help build the back pressure.
 
5: Remove the syringe from the Tank and wipe off any spillage.
 
If you are filling more than one and want to store them, at this point place the silicone end cap back on the Tank, making sure the notches in the cap line up with the flat sides of the Tank. They are now ready to me stored.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk