Follow

Filling/Re-Filling your Inferno BCT

Filling your Inferno BC TubeTank- Step 1:


A: Unscrew
Remove the base of the Inferno BC TubeTank by unscrewing it from the top to expose the inner tank well.


Filling your Inferno BC TubeTank- Step 2:

B: Fill
Fill the Inferno BC TubeTank by dripping eliquid into the tank well. Make sure you do not drip any eliquid into the center air shaft.

C: Fill Limit
Make sure you do not fill the eliquid past the end of the air shaft. If you do this, the air shaft will flood with eliquid and the eliquid will leak out the bottom of the Inferno BC TubeTank when you reassemble it. 


Filling your Inferno BC TubeTank- Step 3:

D: Reassemble 
Replace the base of the Inferno BC TubeTank by screwing it back together with the tank well. Make sure to screw it together firmly without misthreading the screw points.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk